Cobetter BevClear® BW Filter Cartridges are constructed of nanofiber media with support layers that allow maximum backwash cleaning efficiency. Characterized by its high dirt holding capacity and flow rates, they effectively remove particles. It is recommended for fine filtration in brewing applications.
Features and Benefits
Special design ensures backwash cleaning and therefore increases filter lifetime
Super fine nanofiber media provides high dirt holding capacity and retention efficiency
Provides defined porosity with high filtration area
No fiber releasing per FDA 21CFR
Complies with Food Contact Regulations: FDA 21CFR177-182 and 1935/2004 EC
For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message
| Filter Medium | Super fine Nano Fiber |
| Cage / Support | Polypropylene (Nanofiber) |
| Core / End Caps | Polypropylene |
| Max. Temperature | 80°C |
| Max. Differential Pressure | 5.0 bar / 21°C (forward flow) 2.0 bar / 80°C (forward flow) 2.0 bar / 21°C (reverse flow) |
Steam Sterilization | ≥20 cycles (121°C/30 min @ Max. Differential Pressure of 0.5 bar) |
| Hot Water Sterilization | 85°C/30 min @ Max. Differential Pressure of 2.0 bar |
| Cleaning Solution | 2% NaOH Solution @≤ 65°C |
| Effective Filtration Area | 0.6m² / 10 inch |
| Efficiency | >99.99% | 99.98% | 99.90% | 99% | 95% | 90% |
| β ratio | 10000 | 5000 | 1000 | 100 | 20 | 10 |
| B | 1.9 | 1.0 | 1.2 | 0.8 | 0.5 | 0.1 |
| D | 2.2 | 2.0 | 1.9 | 1.2 | 0.9 | 0.5 |
| G | 3.0 | 3.0 | 2.2 | 1.7 | 1.3 | 1.1 |
| H | 5.0 | 5.0 | 3.4 | 2.7 | 2.0 | 1.7 |
| K | 10 | 10 | 7.7 | 5.6 | 4.1 | 3.8 |
| BCBW | Removal Ratings | End Cap | Nominal Length | Seal Material | -F | ||
| [Ф64] | B=PPB | DOE=Double Open End | 05= 5" | S=Slilicone | |||
| [Ф71] | D=PPD | HTC=222 O-ring/Flat (PBT Insert) | 10= 10" | E=EPDM | |||
| G=HAG | HTF=222 O-ring/Fin (PBT Insert) | 20= 20" | V=Viton | ||||
| H=HAH | HSF=226 O-ring/Fin (PBT Insert) | 30= 30" | |||||
| K=HAK | SSF=226 O-ring/Fin (SS Insert) | 40= 40" | |||||
| SSC=226 O-ring/Flat (SS Insert) | |||||||
| STF=222 O-ring/Fin (SS Insert, 3 Tabs) |
