PSSF Stainless Steel Pleated Felt
Filter Cartridge

Cobetter PSSF Stainless Steel Pleated Felt Filter Cartridges are composed of stainless steel sintered felt shaped during the pleating process.  These filters have a large filtration area with high flow rates and low pressure drops. The unique  stainless steel sintered felt is made from stainless steel fibers which have been sintered to form a high porous depth filtration material. PSSF Filter Cartridges features include a graded pore size from coarse (upstream) to fine (downstream), which results in a higher dirt holding capacity with excellent filtration efficiency and longer service life.  These filters are widely used in steam filtration or liquids with high viscosities, e.g. sugars and syrups.


Features and Benefits

  • Absolute-rated
  • All stainless steel construction excellent chemical compatibility
  • Excellent chemical compatibility and high temperature resistance 
  • Specialized alloy for high corrosion and oxidation resistance 
  • Corrosive and oxidation resistant
  • High dirt holding capacity and long service life






  • Specifaction
  • Performance
  • Ordering Information

For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message


Materials of Construction

Filter Media304/316 Stainless Steel
Cage / Support304/316 Stainless Steel
Core / End Caps304/316 Stainless Steel


Operating Conditions

Recommended Continuous 

Operating Temperature Range

-75°C to +200°C

Note: Temperature dependant on o-ring compound

Max. Differential Pressure

5.0 bar / 21°C (forward flow)

2.0 bar / 21°C (reverse flow)

Hot Water Sterilization85°C/30min @ Max. Differential Pressure of 2 bar
Cleaning Solution

Reverse Rinse by Pure Water/Compressed Air @ ≤2bar; 

Ultrasonic Rinsing 

Effective Filtration Area0.12 m² / 10inch



Retention Rates: PSSF v. TIC Titanium Filter


PSSF 

TIC Titanium Filter

Material     SS Sintered Felt (no fiber releasing)

Metal Powder Metal Powder

(will release after long term use)

Strength

Pleated Structure High Temperature

& Pressure Resistance

High Temperature (Sintered) Unstable Pressure
Retention Rates  Absolute-Rated EFA: up to 0.12m²Depth Filter EFA: 0.056m² 



Parameters

CodeRemoval Ratings(μm)Pore Efficiency%Initial Differential Pressure(KPa)Absolute Removal Rating(μm)Average Air Permeability (L/dm²min)Flow Rate (m³/h)
13.00.570%7.9100.8
25.0175%5.0471.3
371.576%6.5
631.6
410275%7.81052.0
5251680%19.03552.5
64025----
76045----

Testing Performed According to GB/T5453; Testing DP is 200Pa; Testing Medium is Air

Testing Liquid Viscosity is 1CP.S; Filter Tested with 60mm diameter and 300mm length; Testing Pressure is 1.5 bar

Bekaert Filtration Media



Ordering Information

    Removal Ratings   End CapDiameterNominal Length  Seal Material  -F
PSSF    0001=0.01μmDOE=Double Open EndD25=25mm05= 5"S=Slilicone

0022=0.22μmTC=222/FlatD30=30mm10= 10"E=EPDM


SC=226/FlatD50=50mm20= 20"V=Viton


L=ScrewD65=65mm30= 30"




D70=70mm40= 40"










  






Contact Form
Company* Application*
First Name* Last Name*
Email*
Tel
Address
Comment
 

columns marked with "*" are important